What does switch tools mode mean?

5 – Switch Tools Mode triggers force boot to recovery and actually for radio troubleshooting, and this work-around which involves deleting your CID(Carrier Id).

What is QCOM on Android?

Qcom mode is used for activation of qualcomm modem port, it need to install qualcomm drivers.

How do I fix stuck on fastboot mode?

When your phone is stuck in Fastboot mode, remove the back cover of your device and pull the battery out. This will power down your device. Wait for about a minute and then put the battery back in your phone. Turn on your phone and it should now be in normal mode.

How do I enable tools mode config?

Just hold power button for 10 secs and turn On phone. It should work normally and keep the tools mode disabled. (Just don’t change anything).

What is bootloader mode?

The bootloader on your Android device actually tells your phone what operating system to run and from when. The bootloader also loads up other essential items for your device like the recovery mode. This is how your phone gets to know how to boot up, what essential files to use, and so on.

What are BP tools?

BP Tools is a set of freeware applications. They are used for Electronic Funds Transfer payment transaction service development, allowing money to be moved from one financial institution account to another. The functionality is the same whether money is transferred within the same institution or to another one.

What is the recovery mode?

Android devices have a feature called Android Recovery Mode, which allows users to fix some problems in their phones or tablets. Technically, Recovery Mode Android refers to a special bootable partition, which contains a recovery application installed in it.

How do I put my Motorola in recovery mode?

Ensure the device is powered off. Press and hold the Volume Down button. While continuing to hold volume down, press and hold the Power button until the boot mode screen appears. From the Bootloader selection screen (image of an Android with Start), select RECOVERY MODE.

How do I get into recovery mode?

Press and hold the Volume Down and Power buttons simultaneously until the device turns on. You can use Volume Down to highlight Recovery Mode and the Power button to select it. Depending on your model, you may then have to enter your password and choose a language to enter recovery mode.

What is no command in recovery mode?

By Karrar Haider in Android. Android “no command” error usually shows up when you try to access the recovery mode or while installing a new software update. In most cases, your phone is just waiting for a command to access recovery options.

What is factory mode?

What is Android Factory Mode? Factory mode or what is commonly known as factory reset is one of the options available for you when your Android device is in recovery mode. Several options are available for you once you enter Recovery mode on your device but few are as effective as the wipe data/ factory reset option.

How long is recovery mode?

The restore process is taking a long time to finish. The amount of time needed by the restore process depends on your geographical location and the speed of your Internet connection. Even with a fast Internet connection, the restore process might take 1 to 4 hours per gigabyte to complete.

What can I do in recovery mode Android?

How To Use Android’s Recovery Mode Options
  1. Reset system setting – this lets you reset your device to the factory settings.
  2. Wipe cache – it erases all the cache files from your device.
  3. Erase everything – use this if you’d like to delete everything on your device.

What is repair apps in recovery mode?

So, when troubles occurs (lags, some types of app crashes) , with repair apps in recovery mode you can do a manuall re-optimize apps so the system will return snappie like it is after a firmware update..

Why is my phone in recovery mode?

If you find that your phone is stuck in Android recovery mode, the first thing to do is to check your phone’s volume buttons. It might be that your phone’s volume buttons are stuck and are not operating the way they should. It might also be that one of the volume buttons gets pressed when you turn on your phone.

Why is recovery mode not working?

The most common reason to encounter recovery mode not working and get no command error is that the Superuser access has been denied or terminated when Android OS updating, or phone resetting. In addition to that, the termination of Superuser access during Google Play Store installation can even cause this error.

How do I put my iPhone in recovery mode without the home button?

For iPhone 7/7 Plus
  1. Connect your device to the computer.
  2. Press and hold the «volume down» button and «side» button at the same time.
  3. Keep holding the button until «Connect to iTunes» appear on the screen. Don’t release the button when you see the «Apple» logo.

What can I do in iPhone recovery mode?

Putting a device into Recovery Mode allows the iPhone to run and connect to iTunes or a computer while not booting up the iOS. Doing this lets you update the OS to a new, working version or restore a working backup onto the device. It’s not hard to use, but it’s something you only use when other things don’t work.

How do I exit recovery mode?

Recovery mode has capability to access some core functioning in the device, such as Resetting the phone,Data Cleaning,Installing updates, Backup or restore your data etc. For Example, If your android device not acting correctly, that’s one situation you need to use recovery mode.